Steelshot
Steelshot, round (low carbonized)
Low carbon, cast-steel blasting shot is longer lasting and more durable than high-carbon blasting shot because it is resistant to cracking. Tests carried out by customers showed reductions of more than 20% in consumption when compared with high-carbon blasting shot, resuting from special characteristics of the low carbon, cast-steel blasting shot material.
Applications:
* hardening
* cleaning
| Type: | Grain: | Article no.: |  |
| S 70 | (0,2 - 0,4 mm) | 4-17501-0071 | |
| S 110 | (0,3 - 0,6 mm) | 4-17501-0111 | |
| S 170 | (0,5 - 0,8 mm) | 4-17501-0171 | |
| S 230 | (0,6 - 0,9 mm) | 4-17501-0231 | |
| S 280 | (0,7 - 1,1 mm) | 4-17501-0281 | |
| S 330 | (0,8 - 1,2 mm) | 4-17501-0331 | |
| S 390 | (1,0 - 1,6 mm) | 4-17501-0391 | |
| S 460 | (1,2 - 1,8 mm) | 4-17501-0461 | |
| S 550 | (1,5 - 2,2 mm) | 4-17501-0551 |
Steelshot, angular
Applications:
* cleaning
* roughening and matting
* preparation for coating, painting and enameling
Possible hardness:
* Type GP (ca. 40 - 50 HRC)
* Type GL (ca. 55 - 60 HRC)
* Type GH (ca. 64 - 68 HRC)
| Type: | Grain: | Article no.: |  |
| GP 12 | (1,7 mm) | 4-17502-3012 | |
| GP 14 | (1,4 mm) | 4-17502-3014 | |
| GP 16 | (1,2 mm) | 4-17502-3016 | |
| GP 18 | (1,0 mm) | 4-17502-3018 | |
| GP 25 | (0,8 mm) | 4-17502-3025 | |
| GP 40 | (0,6 mm) | 4-17502-3040 | |
| GP 50 | (0,3 mm) | 4-17502-3050 | |
| GP 80 | (0,2 mm) | 4-17502-3080 | |
| GP 120 | (0,1 mm) | 4-17502-3120 |
| Type_ | Grain: | Article no.: | |
| GL 12 | (1,7 mm) | 4-17502-2012 | |
| GL 14 | (1,4 mm) | 4-17502-2014 | |
| GL 16 | (1,2 mm) | 4-17502-2016 | |
| GL 18 | (1,0 mm) | 4-17502-2018 | |
| GL 25 | (0,8 mm) | 4-17502-2025 | |
| GL 40 | (0,6 mm) | 4-17502-2040 | |
| GL 50 | (0,3 mm) | 4-17502-2050 | |
| GL 80 | (0,2 mm) | 4-17502-2080 | |
| GL 120 | (0,1 mm) | 4-17502-2120 |
| Type: | Grain: | Article no.: | |
| GH 12 | (1,7 mm) | 4-17502-1012 | |
| GH 14 | (1,4 mm) | 4-17502-1014 | |
| GH 16 | (1,2 mm) | 4-17502-1016 | |
| GH 18 | (1,0 mm) | 4-17502-1018 | |
| GH 25 | (0,8 mm) | 4-17502-1025 | |
| GH 40 | (0,6 mm) | 4-17502-1040 | |
| GH 50 | (0,3 mm) | 4-17502-1050 | |
| GH 80 | (0,2 mm) | 4-17502-1080 | |
| GH 120 | (0,1 mm) | 4-17502-1120 |